Ametek B/W Controls 6012-EP3 Electrode Plug

B/W electrode plugs are typically installed in B/W type E cast holders. They provide a strong, pressure tight mechanical mounting for solid rod electrodes. They can also be used with wire suspension electrodes when coupled with the 6013-CSS wire connector (not included). Plugs mount to the holder using a 3/8-18 dryseal (PTF) SAE short pipe thread.

• Holds one electrode (not included)
• 303 stainless shell
• Teflon insulator
• Teflon seal
• Suitable for up to 500 PSI at 270 F
• Suitable for up to 300 F at 250 PSI
• Suitable for saturated steam up to 125 PSI

For more infomation, please see the Ametek B/W Controls catalog.